Pop-Up Displays Setup Instructions

1. Remove pop-up components from the transit case.
2. Locate frame and expand to fullest extent making sure that the hanging pips are at the top of the frame.
3. Lock frame arms to make the frame rigid (see pic)
4. Locate magnetic bars and fix vertically to the face of the pop-up frame including the reverse of the frame at the ends (to hang "D end panels" on)
5. Take out your graphics panels or fabric panels and put them in order. Begin from one end of the frame and locate the top of the panel to the frame using magnetic pips at top of panel and frame.
6. Once the panel is fixed at the top fix the edges on the panel to the magnetic bars (already clipped on the pop-up frame) using the pre-applied magnetic tape.
7. Line up graphics one ata atime to produce a seamless mural.
8. Attach the halogen lighting kit to the rear of the pop-up frame. You will need to attached the cantilever fixing directly on the scissor joint of the top horizontal pop-up bars. the lights will then hang over the front of the face securely.
9. The pop-up case can be used as a counter if you have ordered the case to counter conversion kit.

• pop-up displays
  • 10' pop-up displays
  • 8' pop-up displays
• tabletop displays
• serpentine displays
• gullwing displays
• hanging displays
• display home

• lighting
• colors/fabrics
• cases
• counter conversion
• setup instructions

• portable display stands
• revolver rolling banners
• retractable 80 banner stands
• tension portable displays
• wing displays